How To Install Windows XP from USB Flush drive

1. Firstly, download the software Win to Flash which does not need any installation. Just double-click the setup file and the following screen appears.

Install Windows XP from USB
2. Head to the ‘Task’ tab and choose your task as the following.
Choose the Task type as “Transfer Windows XP/2003 setup to flush” from the drop-down. Click the ‘Create’ button.
Install Windows XP from USB Setup Transfer
Click the ‘Next’ button to continue.
Install Windows XP from USB drive
3. Select the source path of the Windows installation disk. Or, locate the path of the copy that is dumped at your hard drive as well as the path of your USB flash/pen drive.
Windows XP Source Path
4. Click the ‘Next’ button and wait until the bootable copy is prepared into your USB Flash drive.
Once completed, you can start installing Windows XP. It is a pretty easy to install the Windows XP from that USB drive. Just boot your computer from that USB stick. To do that follow the steps below.

How to boot your computer from the USB drive

  • Press the F2 key ( or the DELETE key, it varies with the brand of your computer mother board) to enter into the BIOS settings.
  • Head to the “Boot” menu and set the boot preference for the Removable disk as “First”.
  • Save the setup and exit by pressing the F10 key.
Bios settings to install windows XP from USB drive
Now your computer should boot from the USB/pen drive.
Hope this helps to setup Windows XP in your desktops or laptops which do not have CD or DVD drive. You can just do it from a USB drive.
Alternatively, you can go through a longer but more reliable way to install Windows XP from USB drive by Creating bootable USB Drive for XP.

Comments

Post a Comment

Popular posts from this blog

How to configure HDLC and PPP step by step guide and example

Image
In this article I will demonstrate how can you configure wan encapsulation protocols. HDLC is the default encapsulation for synchronous serial links on Cisco routers. You should only use the encapsulation hdlc command to return the link to its default state. For practical example of HDLC PPP create a simple topology as shown in figure or download this pre configured topology and load it in packet tracer. Double click on R1 and check the default encapsulation Router> Router#show interfaces serial 0/0/0 Serial0/0/0 is up, line protocol is up (connected) Hardware is HD64570 Internet address is 20.0.0.1/8 MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 1/255 Encapsulation HDLC, loopback not set, keepalive set (10 sec) [output is omited] As you can verify that default encapsulation on router is HDLC. A wan link work only when it detects same protocols on same sides. To check it change the default encapsulation to PPP. Router#configure terminal Router...
Read more

How to create an FTP user in Windows Server 2008

Image
Once installed on your server, go to the  START  menu, and in the search box, type " local users ", then click on the link " Edit local users and groups " The Local Users and Groups panel will then open.  Right click on the "Users" folder, and select "New User..." Add your new user: To add the new user to an existing web site, open IIS Manager,  select the web site , and click the  'Add FTP Publishing " link: - Note: if you don't see this link, first install FTP Publishing Service 7.5: 1. Go to StartMenu and Select  Microsoft Web Platform Installer   2. Under the  Web Platform  tab, select  customize  and check off  FTP Publishing Service 7.5 Configure the FTP site according to your preferences. In this example below, are are enabling Virtual Host Names so that you can set up FTP sites on the same IP address. Click Next.. And on the next screen: set the Aut...
Read more

how to hide a drive in your computer ..

Image
कम्प्युटर के प्रणाली के भीतर कंटेंट को छुपा ने लिए कइ तरीके है| लेकिन क्या आप जानते है की डेटा सुरक्षीत करने के लिए, आप पुरे हार्ड डिस्क ड्राइव को ही छिपा सकते है? इस अद्भुत कंप्यूटर चाल में आप देखेंगे की आप जब चाहें अपने ड्राइव को छिपा सकते है| यह ट्रिक विंडोज 7 और विंडोज 8 मे काम करती है| इन चरणों का पालन करें - My Computer को राइट क्लिक करें| Manage को क्लिक करें| अब Computer Management window ओपन होगी| बाएं साइड सें Disk Management का विकल्प का चयन करें| सभी हार्ड डिस्क और उसके सभी पार्टिशन दाहिने हाथ की ओर दिखेंगे| आप को जो पार्टिशन छिपाना है, उसपर राइट क्लिक करें और "Change Drive Letters and Path" विकल्प का चयन करें| एक नई छोटी विंडो ओपन होगी| यहाँ से Remove बटन को क्लिक करें और फिर Yes को क्लिक करें| आपका ड्राइव अब My Computer में छिप जाएगा| To unhide the drive: Disk Management पर जाए hidden partition पर राइट क्लिक करें और बाद में "Change Drive Letters and Path" को पुनः चयन करें| add पर क्लिक करें और एक उपयुक्त...
Read more